Home Search

DriveWorks Solo 22
Boss/Base Thin

Send Feedback

Boss/Base Thin

This document describes the types of rules that can be applied to models that have advanced feature parameters captured.

Driving advanced feature dimensions increases model generation time. Where possible capture feature dimensions (distances, numbers and angles) as dimensions rather than an advanced feature parameter.

During model generation captured dimensions are driven before captured advanced feature parameters. If the advanced feature parameter has also been captured as a dimension the value being driven into the advanced feature parameter will override the captured dimension.

Boss/Base Thin

ParameterInput TypeDescription
Both DirectionsTrue/FalseSet whether the extrusion is in both directions
Cap EndsTrue/FalseCaps the ends for a thin base extrude feature
Cap ThicknessDistanceSets the end cap thickness for a thin base extrude feature
D1 Apply DraftTrue/FalseDetermines whether a draft is applied in direction 1
D1 Draft AngleAngleSet the Draft Angle for the extrusion in direction1
D1 Draft OutwardTrue/FalseSets if extrude D1 has outward draft
D1 End ConditionOne of the following values:

Blind

ThroughAll

ThroughNext

MidPlane

Sets end condition for D1
D1 Reverse OffsetTrue/FalseSets direction in D1
D1 Translate SurfaceTrue/FalseSets the translate surface setting for this extrude feature in D1
D1 Wall ThicknessDistanceSet the wall thickness of the thin extrusion feature D1
D1 DepthDistanceSet the Depth for the extrusion in direction1
D2 Apply DraftTrue/FalseDetermines whether a draft is applied in direction 2
D2 DepthDistanceSet the Depth for the extrusion in direction2
D2 Draft AngleAngleSet the Draft Angle for the extrusion in direction2
D2 Draft OutwardTrue/FalseSets if extrude D2 has outward draft
D2 End ConditionOne of the following values:

Blind

ThroughAll

ThroughNext

MidPlane

Sets end condition for D2
D2 Reverse OffsetTrue/FalseSets direction in D2
D2 Translate SurfaceTrue/FalseSets the translate surface setting for this extrude feature in D2
D2 Wall ThicknessDistanceSet the wall thickness of the thin extrusion feature D2
From Offset DistanceDistanceSets the offset distance
From Offset ReverseTrue/FalseSets whether the offset is reverse for this extrusion
From TypeOne of the following values:

SketchPlane

Offset

Sets the type from which to create an extrusion
MergeTrue/FalseSets whether to merge the results of the extrude feature in a multibody part
Reverse DirectionTrue/FalseSets whether to reverse the direction of the extrusion feature
Thin Wall TypeOne of the following values:

OneDirection

OppDirection

MidPlane

TwoDirection

Sets the thin wall type for a thin base extrude feature
Auto FilletTrue/FalseTrue to automatically fillet edges, false to not
RadiusRadius ValueSets the radius value of the fillet

(Please note, Auto Fillet advanced feature parameter must be set to true)