Home Search

DriveWorks Solo 22
Features

Send Feedback

Features

This document describes the types of rules that can be applied to models that have advanced feature parameters captured.

Driving advanced feature dimensions increases model generation time. Where possible capture feature dimensions (distances, numbers and angles) as dimensions rather than an advanced feature parameter.

During model generation captured dimensions are driven before captured advanced feature parameters. If the advanced feature parameter has also been captured as a dimension the value being driven into the advanced feature parameter will override the captured dimension.

Features

Chamfer

ParameterTypeDescription
Type

One of the following values:

AngleDistance

DistanceDistance

Vertex

Set the Type Of the Chamfer
TangentPropagationTrue/FalseSet the Tangent Propagation Of the Chamfer
KeepFeaturesTrue/FalseSet the Keep Features Of the Chamfer
EqualDistanceTrue/FalseSet the Equal Distance Of the Chamfer
EdgeChamferAngleAngleSet the Edge Chamfer Angle Of the Chamfer
EdgeDistance1Distance
EdgeDistance2Distance

Dome

ParameterTypeDescription
EllipticalTrue/FalseSets whether this dome is a half ellipsoid, with a height equal to one of the ellipsoid radii
HeightDistanceSets the height of the dome
ReverseDirTrue/FalseReverses the direction of the dome

Draft

ParameterTypeDescription
AngleNumberSets the angle for this draft feature
AllowReducedAngleTrue/FalseSets the angle for this draft feature AllowReducedAngle

Wrap

ParameterTypeDescription
ReverseDirectionTrue/FalseSets whether or not to reverse the direction of the wrap feature

Fillet

ParameterTypeDescription
DefaultRadiusDistanceSet the Default Radius
KeepFeaturesTrue/FalseSet the Keep Features
PropagateToTangentFacesTrue/FalseSet the Propagate To Tangent Faces
RoundCornersTrue/FalseSet the Round Corners
OverflowType

One of the following values:

Default

KeepEdge

KeepSurface

Set the Overflow Fillet Type

Rib

ParameterTypeDescription
ThicknessDistanceSets the overall thickness of the rib
DraftAngleAngleSets the draft angle for the rib
DraftOutwardTrue/FalseSets whether the rib has an outward draft
EnableDraftTrue/FalseSets whether the rib has draft
DraftFromWallTrue/FalseSets whether the rib's draft is from wall or from sketh plane
ExtrusionDirectionTrue/FalseSets whether the rib's ExtrusionDirection
IsTwoSidedTrue/FalseSets whether the rib Is Two Sided
ReverseThicknessDirTrue/FalseSets whether to Reverse the rib's Thickness Direction
FlipSideTrue/FalseSets whether the rib Is Two Flip Side
TypeTrue/FalseSets whether the rib Type

Scale

ParameterTypeDescription
ScaleXNumberSets the scaling factor in the X direction when uniform scaling is disabled
ScaleYNumberSets the scaling factor in the Y direction when uniform scaling is disabled
ScaleZNumberSets the scaling factor in the Z direction when uniform scaling is disabled
IsUniformTrue/FalseSets uniform scaling for this scale feature
ScaleUniformNumberSets the uniform scaling factor for this scale feature when uniform scaling is enabled
Type

One of the following values:

Centroid

Origin

CordinateSystem

Sets the Type of scaling

Text

ParameterTypeDescription
TextTextControls the text in the sketch if present.

Shell

ParameterTypeDescription
ThicknessDistanceSets the overall thickness of the shell feature
DirectionTrue/FalseSet the direction of the Shell feature, TRUE = Outwards

Simple Hole

ParameterTypeDescription
DepthNumberSets the depth of this simple hole feature
DiameterNumberSets the diameter of this simple hole feature
DraftAngleNumberSets the draft angle for this simple hole feature
DraftOutwardTrue/FalseSets whether to draft the simple hole feature outward